Heat Controller MSS-009B/A - Indoor Unit Disassembly (18 k, 24 k Models); Removing Discharge Grille; Removing Evaporator Assembly

0
r
LJ
" Remove three
screws fixing control box
and
motor.
" Remove
control
box assembly holding two hooks
fixing
upper
sides
of motor.
3.
To
remove the Discharge Grille.
" Remove
a
screw
on
the left
side of chassis.
" Pull the right
side
of
the
discharge
grille out from the
chassis first
and
left side
carefully.
4. To remove the
Evaporator.
-Unhook the tab on the left
inside edge of
the
chassis
by pressing
it
outwards.
-47-
L._J