Need help?Do you have a question about the Heat Line Capriz 2 24c and is the answer not in the manual?
Classification of action-related warnings using warning signs and signal words.
Definition of the product's intended purpose and user limitations.
Covers installation by skilled tradesmen and dangers from improper operation.
Actions for escaping gas and risks from blocked or leaking flue gas pipes.
Risks from flue gas, explosive materials, safety devices, changes, and maintenance.
Risks of corrosion from unsuitable air and material damage caused by frost.
Requirement to observe all operating instructions for system components.
Guidance on keeping the manual and other documents safe.
Specifies which product article numbers and gas types the instructions apply to.
Explanation of the CE label indicating product compliance with directives.
Information on locating the serial number and details on the identification plate.
Diagram and explanation of the product's physical components and controls.
Identification and function of buttons and display on the control panel.
Explanation of the display symbols and the functions of each control button.
Controls heating mode using timer and explains operator/installer levels.
Steps to start the product and describes the information shown on the basic display.
Procedure for checking and maintaining the correct heating system pressure.
Instructions and cautions for filling the heating system with water.
Guide to choosing and activating different operating modes (heating, hot water).
Procedure for adjusting the hot water temperature based on control source.
How to adjust the heating flow temperature based on different control conditions.
Overview of settings and detailed instructions for programming the timer.
Steps to put the product into standby mode and its implications.
Details on the product's frost protection function and system protection.
Guide to self-checking and troubleshooting common product issues.
Explanation of how fault codes are displayed and what to do when they appear.
Importance and requirements for annual inspection and biennial maintenance.
Instructions for cleaning and maintaining the product's exterior.
Procedure for regularly checking the condensate drain for blockages.
Steps for temporarily switching off the product, e.g., for holidays.
Guidance on permanently removing the product from service by a professional.
Information on how to obtain details about the manufacturer's guarantee.
Contact information for the customer service department and website.
Details on settings available in the operator level menu.
Table listing faults, their causes, and recommended measures.
To Next Page
General
