EasyManua.ls Logo

Heat Line Monza 24 User Manual

Heat Line Monza 24
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Installation and Servicing
High Effi ciency Condensing Combination Boilers
www.heatline.co.uk
Models
24
G.C. No. 47-157-21
28 G.C. No. 47-157-22
Monza
Service Call 0844 736 9042, Technical Help (Chargeable) Call 0906 802 0253
bar
1
2
3
4
0
mode
reset

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Heat Line Monza 24 and is the answer not in the manual?

Heat Line Monza 24 Specifications

General IconGeneral
BrandHeat Line
ModelMonza 24
CategoryBoiler
LanguageEnglish

Summary

Safety and Statutory Requirements

3.1 Safety Instructions

Guidelines for safe handling, operation, and maintenance of the appliance.

3.2 Statutory Requirements

Compliance with UK and IE building and safety regulations.

Appliance Technical Data

Boiler Hanging and Hydraulic Connections

8.1 Gas and Water Connections

Requirements for connecting gas and water supplies.

Flue Configuration and Front Panel Access

10.1 Electrical Connections

Safety and procedural notes for electrical connections.

Electrical Wiring and Board Access

10.4 Electrical Wiring

Instructions for connecting the boiler to the electrical supply.

Electrical System Controls and Testing

10.6 Testing Electrical Connections

Procedures for verifying electrical installation integrity.

Wiring Diagram

10.7 Wiring Diagram

Schematic showing the boiler's electrical interconnections and components.

Commissioning Procedures

11.1 Switching On

Initial steps for powering up and starting the boiler safely.

11.2 Filling the CH System

How to fill and vent the central heating circuit for operation.

Initial Lighting and Gas Rates

11.5 Initial Lighting

Steps for starting the boiler and setting basic parameters.

11.6 Gas Rates

Information on gas supply requirements and testing.

System Testing and Completion

11.7 Testing Heating System

Procedures for testing the central heating system's operation.

11.8 Testing Domestic Hot Water

Steps for verifying domestic hot water system functionality.

Installation Settings

13 Installation Settings

Details on configuring boiler parameters for installation.

Test Modes, CO2 Measurement, and User Information

13.1.2 Test Modes

Procedures for accessing and using diagnostic test modes.

13.1 CO2 Measurement

Information on checking the appliance's combustion performance.

Maintenance and Fault Diagnosis

MAINTENANCE

Recommendations for regular boiler servicing.

15.1 Fault Diagnosis

Initial checks to perform before diagnosing specific faults.

15.1.1 Check Electrical Installation

Procedures for verifying the electrical installation's safety.

Gas Supply Check and Fault Memory

15.1.2 Check Gas Supply

Steps to ensure the boiler has adequate gas supply.

Functional Flow Diagrams and Gas Conversion

Draining and Servicing Procedures

18 Servicing Recommendations

General guidance on servicing the boiler.

18.1 Annual Maintenance

Key checks to perform during annual servicing.

Combustion Checks and Settings

18.2 Combustion Check

How to check and adjust air/gas ratio for optimal combustion.

Combustion Adjustment and Servicing Completion

18.2.3 Maximum Rate Check and Adjustment

Procedures for verifying and adjusting maximum gas rate.

Component Checks and Filters

Combustion Block Components

Combustion Block Component Replacement

Gas Valve, Fan, and Condensate Trap Replacement

PCB Replacement and Wiring

Spare Parts Information

20 Spare Parts

Information on using genuine spare parts for safe operation.

Gas Boiler System Commissioning Checklist

Commissioning Checklist

Checklist for installers to ensure compliant commissioning.

Related product manuals