Need help?Do you have a question about the Heat Line Monza 28 and is the answer not in the manual?
General| Mounting type | Wall-mounted |
|---|---|
| Number of circuits | 2 |
| Closed combustion chamber | Yes |
| Maximum thermal power | 28 kW |
| Maximum heat output | 28 kW |
| Minimum heat output | 5.6 kW |
| Power consumption | 110 W |
| Power supply voltage | 230 V |
| Width | 400 mm |
| Height | 700 mm |
| Type | Gas |
| Output (DHW) | 28 kW |
| Max working pressure | 3 bar |
| Electrical supply | 230 V / 50 Hz |
| Expansion tank volume | 8 liters |
| Gas type | Natural gas |
| Dimensions (HxWxD) | 700x400x299 mm |
Details on product documentation, associated documents, symbols, and guarantee registration.
Overview of the boiler's components, safety features, and functions.
Essential safety guidelines for handling, installation, and operation.
Covers legal obligations and standards for installation and safety.
Guidance on selecting the appropriate site and position for boiler installation.
Minimum required distances for servicing and maintenance around the boiler.
Important considerations and checks before proceeding with boiler installation.
Description of the safety valve's function and importance.
Details on the boiler's integral expansion vessel and its capacity.
Guidance on connecting the boiler's hydraulic and gas systems.
Guidelines for safely discharging condensate from the boiler.
Instructions for making electrical connections to the appliance.
Detailed instructions for connecting the boiler to the main electrical supply.
Procedures for checking electrical system integrity after installation.
Procedure for initial power-up and system checks.
Guidance for diagnosing and resolving common appliance issues.
Steps to verify the electrical system's safety and functionality.
Procedures and checks for routine servicing of the appliance.
Detailed steps for removing the combustion and door assembly.
Procedure for removing and replacing the heat exchanger.
Guidelines for using and fitting genuine Heatline spare parts.
Instructions for removing, cleaning, and refitting the condensate trap.
Procedure for removing and replacing the main printed circuit board.
Procedure for removing and replacing the user interface printed circuit board.
To Next Page
