Heat-N-Glo SL-32GDV Installation

LOG INSTALLATION FOR SL-32, SL-32S AND SL-32GDV
1. Remove trim door and glass.
2. Unpack all the logs. There should be 5 logs total. See Figure 2.
CAUTION: LOGS ARE FRAGILE; BE CAREFUL WHEN HANDLING.
3. Alternately place a single layer of dime size and shape pieces of Golden Ember (GE-93) and Glowing Ember
(050-721) onto the top of the burner.
FIGURE 1
454-935-C 10/97

Heat-N-Glo SL-32GDV Specifications

General

Model	SL-32GDV
Type	Direct Vent Gas Fireplace
BTU Input (NG)	32, 000
Firebox Width	32 inches
Venting	Direct Vent
Ignition	Electronic Ignition
Warranty	Limited Lifetime Warranty
Fuel Type	Natural Gas / Propane
Control Type	Remote Control
BTU Input (LP)	32, 000 BTU/hr