Heat&Glo PHOENIX42-IFT User Manual

1
HEAT & GLO • PHOENIX42-IFT Installation Manual • 4096-901 Rev. A • 02/18
Installation Manual
Installation and Appliance Setup
INSTALLER: Leave this manual with party responsible for use and operation.
OWNER: Retain this manual for future reference.
NOTICE: DO NOT discard this manual!
In the Commonwealth of Massachusetts installation must be
performed by a licensed plumber or gas tter.
See Table of Contents for location of additional Commonwealth
of Massachusetts requirements.
• DO NOT store or use gasoline or other am-
mable vapors and liquids in the vicinity of this
or any other appliance.
• What to do if you smell gas:
- DO NOT try to light any appliance.
- DO NOT touch any electrical switch.
- DO NOT use any phone in your building.
- Leave the building immediately.
- Immediately call your gas supplier from
a neighbor’s phone. Follow the gas sup-
plier’s instructions.
- If you cannot reach your gas supplier, call
the re department.
• Installation and service must be performed
by a qualied installer, service agency, or the
gas supplier.
WARNING:
FIRE OR EXPLOSION HAZARD
Failure to follow safety warnings exactly
could result in serious injury, death, or
property damage.
Models:
PHOENIX42-IFT
PHX42-HK-TR Hearth Kit
PHX42-HK-GLA Hearth Kit

Heat&Glo PHOENIX42-IFT Specifications

General

Brand	Heat&Glo
Model	PHOENIX42-IFT
Category	Indoor Fireplace
Language	English

Summary

Product Specific and Important Safety Information

Appliance Certification

Details product's safety and performance certifications.

Electrical Codes

Framing and Clearances

Appliance/Decorative Front Dimension Diagrams

Clearances to Combustibles

Critical safety distances from surrounding materials.

Constructing the Appliance Chase

Termination Location and Vent Information

Chimney Diagram

Illustrates vent termination requirements and clearances.

Approved Pipe

Specifies approved venting materials for the appliance.

Use of Elbows

Vent Diagrams

Examples of acceptable vent configurations.

Vent Clearances and Framing

Pipe Clearances to Combustibles

Safety clearances for vent pipes.

Wall Penetration Framing/Firestops

Methods for safely passing vents through walls.

Ceiling Firestop/Floor Penetration Framing

Appliance Preparation

Vent Collar Preparation

Securing and Leveling the Appliance

How to properly mount and stabilize the appliance.

Venting and Chimneys

Assemble Vent Sections

Instructions for connecting vent pipes and fittings.

Assemble Slip Sections

Method for joining vent pipe sections using slip connectors.

Secure the Vent Sections

Requirements for supporting and securing vent runs.

Vertical Termination Requirements

PHOENIX Termination Requirements

Specific termination details for the PHOENIX model.

Electrical Information

General Information

Wiring Requirements

Specific instructions for wiring the appliance.

Gas Information

Fuel Conversion

Gas Pressure

Required gas pressures for optimal performance and safety.

Gas Connection

Steps for safely connecting the gas supply.

Air Shutter Setting

Appliance Setup

Power Vent Speed Control