HeaterMate TH81OT - User Manual

o
HeaterMate
THANK YOU
FOR CHOOSING
HEATERMATE.
THIS ELECTRONIC TEMPERATURE
CONTROLLER
WLL PROVIDE
YOU
WTH COMFORTABLE
HOME ENVTRONMENT AND WLL
HELP
YOU TO
SAVE
ENERGY.
TH81OT PLUG-IN TEMPERATURE CONTROLLER
MAXIMUM 1oAmp OUTPUT
RELAY
(2500
Watt)
It
I
,
.1J.
ooe
a
OPERATING I SAFETY
'/VSTRUCT'ON'S
.
To ensure correct room temperature
reading
keep
the
heater sufficiently separated
from
the controller
.
Avoid moisture, extreme
temperalures, shock
and
vibration.
.
Use indoors on
y
and avoid
direct sunlight
.
Do not open the coniroller.
Repairs must
be
performed
by Heatermate.
.
To
clean
casing and display use a soft cloth.
.
Do
not
clean
with
chemicals
or scouring agents.
.
Do not submeroe
in waler.
BACK UP BATfERY: Charge
up for 24 hours before
setting
controller out of socket.
TIME DELAYS: Built-in delays
ir activating controlled
unit
ia response to a
change in set temperature:
HEATING - 1 min
COOLING
- 3 min
DEFAULT SETNNC
.
N8..,...
WILLALWAYS RETURN TO COOIINC
*
,o
DISPLAY
@
BUTTONS AND SYMBOLS
lEes
o
e
o
G)
o
o
o
0
0
At$
Power
Up
Down
Reset
SET selected
temperature
Cooling
-
snowflake symbol
Heating
-
flame symbol
RM
(Room)
temperature
lndicator light
red
or
green
O-b
1: Plug
controller into
power
outlet socket, the
current room
temperature
(eg:
20.2)
as well as snowflake*
(cooling)
symbol
will
be
displayed
(if
not,
press
reset button
once).
2: To change the function
from
cooling*
(snowflake)
to heating
I
6
(flame)
symbol
press
POWER
(O)
and UP
(A)
button
simultaneously
for 3 seconds.
i

Summary

Operating and Safety Instructions

Safety and Usage Precautions

Use indoors only, avoid direct sunlight, moisture, extreme temperatures, shock, vibration, and chemicals.

Backup Battery Charging

Charge the backup battery for 24 hours before removing the controller from the socket.

Time Delays for Operation

Built-in delays for activating the controlled unit: 1 min for heating, 3 min for cooling.

Getting Started for Heating

Initial Setup and Display Check

Plug in, check room temp and cooling symbol, press reset if needed.

Switching to Heating Mode

Switch from cooling to heating mode by pressing POWER and UP buttons simultaneously for 3 seconds.

Heating Operation

Cooling Operation

Warranty Information

One Year Limited Warranty

Product guaranteed against workmanship defects for one year from purchase date.

HeaterMate TH81OT Specifications

Power

operating voltage	250 volts
load (max)	10 Amps 2500 Watts

Operating Environment

operating temperature range	0°C - 40°C
temperature difference to activate controlled unit (heating)	-1°C
temperature difference to activate controlled unit (cooling)	+1°C

Temperature Measurement

measuring range	-5°C (40°F) - 30°C (85°F)
precision	±1°C
measuring period	10 seconds