Heath Zenith SL-4300 User Manual

FEATURES
• Light comes on when motion is detected.
• Automatically turns light off.
• Half power Accent lighting.
• Photocell keeps the light off during daylight
hours.
REQUIREMENTS
• The Light Control requires 120 volts AC.
• If you want to use Manual Mode, the control
must be wired through a switch.
• Some electrical codes require installation
by a qualified electrician.
Diecast Motion
Sensing Porch Light
for Canadian Tire
This package includes:
• Porch Light
• Easy to use Universal Mounting Bracket
• Mounting Hardware
• Wire Nuts
• Lens Shield
Model SL-4300
© 2004 DESA Specialty Products™ 598-1208-00
Mode: On-Time Works: Day Night
Test 5 Sec x x
Auto/ 1, 5, or 10 min x
Accent Off, 3, 6 Hr, to Dawn x
Manual Until Dawn* x
OPERATION
Note: When first turned on wait about 1
1
/
2
minutes
for the circuitry to calibrate.
* resets to Auto Mode at dawn.
ON-TIME
TEST 1510 MIN
TEST
Set ON-TIME switch to
1, 5, or 10 minutes.
AUTO
ON-TIME Switch at 1, 5, or
10 minutes
... back on.
1 Second OFF
then ...
Manual mode only works at night
because daylight returns the sen-
sor to AUTO.
Flip the light switch off for one
second then back on to toggle
between AUTO and MANUAL
MODE.
Manual mode works only with the
ON-TIME switch in the 1, 5, or 10
position.
MODE SWITCHING SUMMARY
Flip light switch off
for one second then
back on*
* If you get confused while switching modes, turn the
power off for one minute, then back on. After the
calibration time the control will be in the AUTO mode.
MANUAL MODE
AUTO
TEST
MANUAL MODE
ON-TIME
TEST 1510 MIN
DUAL BRITE
®
DIMMER CONTROL
Light comes on half power for selected time after
dusk (Off, 3 hr., 6 hr., until dawn). If motion is sensed,
the light turns on full power for the ON-TIME (1, 5,
or 10 minutes) then returns to accent mode.
Set the ON-TIME switch
on the sensor to TEST.

Heath Zenith SL-4300 Specifications

General

Bulb Type	Halogen
Power Source	Hardwired
Type	Motion-Activated Security Light
Voltage	120V
Wattage	300W
Light Duration	Adjustable
Mounting Height	8 to 12 feet
Weather Resistance	Yes
Material	Metal

Summary

Product Overview and Requirements

Features

Key functionalities of the motion sensing porch light.

Package Contents

List of items included in the product package.

System Requirements

Electrical and wiring prerequisites for installation and operation.

Installation and Wiring Guide

Disassemble Light Fixture

Steps to take apart the existing light fixture.

Install Universal Mounting Bracket

Instructions for attaching the mounting bracket to the junction box.

Wiring Light Fixture

Connecting the fixture wires to the junction box wires.

Grounding Methods

Proper grounding procedures for metal and standard junction boxes.

Other Wiring Options

Diagrams for controlling additional light fixtures.

Operation Modes and Controls

Operation Modes Overview

Table summarizing different operating modes and their functions.

Test Mode

How to set and use the TEST mode for initial setup.

Auto Mode

Description of the automatic operation based on light and motion.

Manual Mode

How to switch and operate the light in manual mode.

Mode Switching Summary

Visual summary for switching between operation modes.

Dual Brite Dimmer Control

Explanation of the two-level lighting feature.

Testing Procedure

Step-by-step guide for testing the sensor and settings.

Setting ON-TIME

Adjusting the duration the light stays on after motion.

Setting Accent Mode Timer

Adjusting accent lighting duration (Off, 3, 6 hrs, Dusk-to-Dawn).

Adjustments and Specifications

Adjusting Sensitivity

How to increase or decrease motion detection range.

Adjusting Coverage Area

Using lens shield to block specific areas and prevent false triggers.

Specifications

Technical details like range, sensing angle, load, and power requirements.

Troubleshooting Guide

Light Will Not Come On

Common causes and solutions for the light failing to activate.

Light Comes On In Daylight

Reasons why the light activates during daytime hours.

Light Comes On For No Apparent Reason

Troubleshooting false triggers from motion or sensitivity.

Light Stays On Continuously

Causes for the light remaining illuminated constantly.

Light Flashes On and Off

Diagnosing intermittent light activation.

Light Does Not Stay On In Manual Mode

Issues with the light shutting off prematurely in manual mode.