Need help?Do you have a question about the Heatrae Sadia FBM series and is the answer not in the manual?
Step-by-step guide for fixing FBM 25 and 50 models to the wall.
Information on obtaining replacement parts for the heater.
Step-by-step guide for fixing FBM 25 and 50 models to the wall.
Information on obtaining replacement parts for the heater.
General| Product Range | FBM Series |
|---|---|
| Manufacturer | Heatrae Sadia |
| Category | Water Heater |
| Mounting | Wall Mounted |
| Approvals | WRAS Approved |
| Standards Compliance | BS EN 12897 |
| Type | Unvented Water Heater |
| Capacity | 15L, 30L, 50L, 80L, 100L |
| Power Rating | 3kW |
| Voltage | 230V AC |
| Element Type | Immersion heater |
| Thermal Cutout | Yes |
| Material | Steel |
| Insulation | Polyurethane foam |
| Heating Options | Electric |
| Connections | 15mm compression |
| Warranty | 2 years |
To Next Page