To Next PageTo Next Page
Need help?Do you have a question about the Heatstore Multiflow 9.5kW and is the answer not in the manual?
Preparations before installation, including checking the unit rating plate and water pressure.
Guidance on selecting the location and mounting the unit securely, considering vandalism and water splashes.
How to plan and execute the electrical cable routing through the unit's side or back.
Steps for physically attaching the unit to the wall, including marking and drilling holes.
Instructions for connecting the water inlet and outlet pipes, including safety warnings.
Details on connecting the unit to the cold water supply using recommended pipe types and lengths.
How to attach the unit using the provided service valve and Ø15mm straight shank connections.
Information on necessary accessories like mixer units and vacuum breakers for showers.
Table and notes on required fuse/MCB, isolator switch, and cable size for different kW ratings.
Specific requirements for bathroom installations, including isolator switch types and placement.
Step-by-step guide on preparing and connecting the unit's internal wiring to the terminal block.
Importance of proper earthing, especially in bathrooms, for safety and regulatory compliance.
Procedure to check for water leaks after installation by running water through the unit.
How to set the service valve for correct water temperature for basin or shower use.
Instructions for operating the unit when connected to a basin tap, emphasizing full tap opening.
Instructions for operating the unit when connected to a shower, including temperature adjustment.
Troubleshooting common issues like no water or incorrect temperature before calling an installer.
Contact information and procedure for seeking technical support for product issues.
Information on recommended accessories and replacement parts, like shower mixer units.
Checklist for qualified service personnel to diagnose and fix problems, including electrical and plumbing checks.
Performance data and expected water temperatures for the 9.5kW model at various flow rates.
Performance data and expected water temperatures for the 10.8kW model at various flow rates.
Performance data and expected water temperatures for the 12.0kW model at various flow rates.
Terms and conditions of the 24-month product guarantee, including installation and usage requirements.
Specific conditions and situations not covered by the guarantee, such as poor installation or lack of maintenance.
General| Brand | Heatstore |
|---|---|
| Model | Multiflow 9.5kW |
| Category | Water Heater |
| Language | English |
