16
SAUNA ASSEMBLY INSTRUCTIONS (CONT.)
7. Slide the LONG BENCH HEATER PANEL into place between the LEFT BACK PANEL and RIGHT PANEL.
Connect the heater plug. Note: It may be necessary to unbuckle the RIGHT PANEL from the RIGHT
BACK PANEL in order to slide the LONG BENCH HEATER PANEL into place.
8. Slide the SHORT BENCH HEATER PANEL into place between the LONG BENCH HEATER PANEL and
LEFT PANEL. Connect the heater plug. Note: Make sure the FLOOR HEATER cable is placed through
the groove in the bottom of the SHORT BENCH HEATER PANEL.
9. Attach LONG BENCH SEAT with 2” SCREWS.
To Next Page
Loading...