hecht 220 - Operation and Maintenance; Operation Guide; Maintenance Procedures; Storage Recommendations

5 / 16
EN
oPErAtioN:
• Set up the stepped regulator to position 0.
• Fill in the supply bin with the required spreadings.
• According to the type of spreading adjust the degree of scattering.
TYPE OF FERTILIZER
ADJUSTMENT
1 2 3 4 5 6 7 8
Green fertilizer x x
Lawn floranid x
Lawn floranid with weed control agents x
Lawn floranid with moss control agents x
Lawn fertilizer plus guano x x
Standard lawn fertilizer with long-term effect x x
Lawn fertilizer with moss control agents x
Lawn fertilizer with weed control agents x x
Bio A zet for lawns x
Organic fertilizer Rasaflor x
Universal fertilizer x x
Lawn nutrition with long-term effect x x
Weed control agent plus lawn fertilizer x
Weed control agent plus lawn fertilizer x x
Sand and salt podle velikosti zrna
mAiNtENANCE
1. Never leave the fertilizer or salt in the container. Remaining chemicals return into the original
packing and carefully close.
2. After each operation carefully wash the spreader and remove all sedimented material. For
removing of hard sediments use hot water. After washing let dry out in the sun.
3. The spreader requires no lubrication.
StorAGE
Store in dry and clean space out of the reach of children in – 5° – +30° C temperature.
trouBLESHootiNG
PROBLEM CAUSE RECOVERY
Device does not spread clogged hopper Clean scuff holes