HEIDELBERG Speedmaster SM 102 User Manual

GR 009560002000000000
I.1
1 Preface Preset Plus feeder
1.1 Notes for the reader
Fig. 1 Operating manual
Target group
This operating manual is addressed to you as the
operator of the Preset Plus feeder. It is valid for all
Preset Plus feeders of this type series. It shows you
how you can operate the Preset Plus feeder and how
you can achieve good results quickly. Always have
this manual available in the vicinity of the printing
press.
Structure of the operating manual
The operating manual is subdivided into main chap-
ters and chapters. The main chapters are marked by
letters (A, B, C, ...).
The sub-chapters are marked by numbers
(1, 2, 3, ...).
The main chapter A Safety contains the information
that is required for working safely on the press.
The main chapter B describes the function of the
electric controller.
The main chapter C describes the mechanical com-
ponents of the Preset Plus feeder, and its operation
and adjustment.
The main chapter D describes the maintenance of
the Preset Plus feeder.
The main chapter D Index helps you in finding spe-
cific information.
Each main chapter and each chapter starts with the
related table of contents.
Control panels and displays
This manual describes the maximum configuration of
the Preset Plus feeder. The control panels and dis-
plays on the Preset Plus feeder may therefore be
different. They depend on type and configuration.
Abbreviations used in this document
Fig. = Figure
D.S. = drive side
O.S. = operator’s side
PU = printing unit
LED = light-emitting diode
MID = press display
KID = compact display
UTK009560201001000000
UTK009560201000000000002

HEIDELBERG Speedmaster SM 102 Specifications

General

Max Printing Speed	15, 000 sheets per hour
Type	Offset Printing Machine
Max Sheet Size	720 x 1020 mm
Min Sheet Size	280 x 400 mm
Number of Printing Units	2 to 10

Summary

Preface Preset Plus Feeder

Notes for the Reader

Guidance for users on how to read the manual effectively.

A Safety: Operation and Protection

Safe Operation Guidelines

Critical safety guidelines for operating the feeder and details on protective devices.

Protective Device Testing and Symbols

Procedures for testing safety devices and understanding their symbols.

Feeder Control Panel Functions

Overview and description of feeder control panel buttons and displays.

B Control: Feeder Operation and Troubleshooting

Feeder Adjustments and Settings

Configuration and adjustment of feeder operational parameters.

Feeder Malfunctions and Error Resolution

Identification and resolution of common feeder malfunctions.

C Machine: Feeder Components and Maintenance

Feeder Operation and Safety

Safe operation and identification of the feeder.

Pile Handling and Alignment

Procedures for handling and aligning piles.

Suction Head Components and Adjustments

Details on suction head parts and how to adjust them.

Sheet Handling and Detection Systems

Details on sheet separators, lays, rollers, and detection systems.

Suction Tape Replacement Procedures

Step-by-step guide for suction tape replacement.

Special Printing Material Adjustments

Specific settings for printing special materials like book paper.