HEIDELBERG Speedmaster CD 102 User Manual (English)

To Next Page

GR 009560002000000000

I.1

1 Preface Preset Plus feeder

1.1 Notes for the reader

Fig. 1 Operating manual

Target group

This operating manual is addressed to you as the

operator of the Preset Plus feeder. It is valid for all

Preset Plus feeders of this type series. It shows you

how you can operate the Preset Plus feeder and how

you can achieve good results quickly. Always have

this manual available in the vicinity of the printing

press.

Structure of the operating manual

The operating manual is subdivided into main chap-

ters and chapters. The main chapters are marked by

letters (A, B, C, ...).

The sub-chapters are marked by numbers

(1, 2, 3, ...).

The main chapter A Safety contains the information

that is required for working safely on the press.

The main chapter B describes the function of the

electric controller.

The main chapter C describes the mechanical com-

ponents of the Preset Plus feeder, and its operation

and adjustment.

The main chapter D describes the maintenance of

the Preset Plus feeder.

The main chapter D Index helps you in finding spe-

cific information.

Each main chapter and each chapter starts with the

HEIDELBERG Speedmaster CD 102 Specifications

General

Substrate Thickness	0.03 - 1.0 mm (Varies slightly depending on specific model and configuration)
Type	Offset Printer
Max Speed	15, 000 sheets per hour
Sheet Size	Varies depending on specific model and configuration
Max Sheet Size	720 x 1020 mm
Gripper Margin	8-12 mm