HEIDELBERG Speedmaster CD 102 - Selecting Cardboard Mode for the Separator Roll Bar

GR SG9013084000001000
CP2000 Center
confidential
B.1.5
1.4 Selecting cardboard mode for the separator roll bar
ÉÉ
É
É
É
12345
Job
Name
Feeder/Cover guide, air adjustment
Cover guide,
air adjustment
1
2
3
0.30
4
5
6
Fig. 5 Separator roll bar in cardboard mode
The Feeder/Cover guide, air adjustment menu en-
ables you to select cardboard mode for the separator
roll bar,even if you are using thin printing materials
(< 0.4 mm). If the stock thickness exceeds 0.4 mm,
cardboard mode is selected automatically and can-
not be deselected afterwards (Fig. 5/4).
1. Press the
Sheet travel button (Fig. 5/1) in the
banner line. The Paper run menu appears.
2. Press the
Feeder button (Fig. 5/2). The Paper
run/Feeder menu appears.
3. Press the
Cover guide, air adjustment button
(Fig. 5/3). The Feeder/Cover guide, air adjust-
ment menu (Fig. 5) appears.
4. To select cardboard mode: Press the button
(Fig. 5/4). The button is now highlighted.
5. Use the arrow keys (Fig. 5/5) to change the pre-
set separator roll height.
6. To exit the menu: Press the
Return button
(Fig. 5/5), or a button in the banner line.
UTKSG9013008000000000003