HEIDELBERG Speedmaster CD 102 - Switching the Double Sheet Detector in the Pull Lay on or off (Option)

GR SG9013088000000000
CP2000 Center
confidential
B.1.9
1.8 Switching the double sheet detector in the pull lay on or off (option)
Basic adjustment / feeder
12345
Job
Name
ÉÉ
É
É
É
Basic adjustment
1
2
3
4
6
5
Fig. 9 Switching the double sheet detector in the pull lay on/off
The Basic adjustments/Feeder menu enables you
to switch on or off the double sheet detector in the
pull lay (option).
1. In the header, press the button Malfunction
(Fig. 9/1). The Malfunction menu appears.
2. Press the
Service button (Fig. 9/2). The Ser-
vice menu appears.
3. Press the Basic settings button (Fig. 9/3). The
menu Basic settings/Start-up warning signal
appears.
4. Press the
Feeder button (Fig. 9/4). The Basic
adjustments/Feeder menu (Fig. 9) appears.
5. To switch on or off the double sheet detector in
the pull lay: Press the button (Fig. 9/5). The but-
ton is highlighted when the double sheet detec-
tor is switched on.
If your press is equipped with a double sheet detec-
tor in the pull lay and an ultrasonic double sheet de-
tector, you may:
D switch on both double sheet detectors
D switch off the double sheet detector in the pull
lay or the ultrasonic double sheet detector.
One of the two double sheet detectors always re-
mains ON.
UTKSG9013008000000000007