Maintenance
confidential
D.3.3
1 Feeder – To be observed for all work
1.1 Safety instructions
Warning – Risk of injury!
Before performing maintenance work,
follow the instructions in the main
chapter ”Safety” in the operating
manual.
Warning – Rotating rollers, cylin-
ders!
Since a press motion is possible while
guards are open, there is a risk of in-
jury in instances of improper operation.
When maintenance points on the
feeder are involved, pay attention to
moving parts and to sheet infeed.
Pay attention to dangerous move-
ments in the area of material infeed.
Do not reach into the gap between
guard and material infeed.
Warning – Cleaners!
Wear protective gloves.
Use only cleaners with a flash point of
at least 55 °C.
UTKSM9040079003000000
UTKSM9040079000000000002
To Next Page
Loading...
