HEIDENHAIN ND 280 - 8-2010 User Manual

Operating Instructions
ND 280
English (en)
8/2010

HEIDENHAIN ND 280 - 8-2010 Specifications

General

Brand	HEIDENHAIN
Model	ND 280 - 8-2010
Category	Controller
Language	English

Summary

I Working with the ND 280 Position Display Unit

I-1 ND 280 Position Display Unit Overview

Describes the ND 280 unit for measuring, adjusting, and positioning tasks with one axis.

I-2 Fundamentals of Positioning

Explains datums, actual position, nominal position, and distance-to-go concepts.

I-3 Basic Functions of the ND 280

II-1 Installation and Electrical Connection

Mounting and Installation

Electrical Connection and Grounding

II-2 Installation Setup

INSTALLATION SETUP Menu

Setting Up the Encoder

Configures the ND 280 for the connected encoder type and signal parameters.

Error Compensation

Explains linear and non-linear error compensation to correct measurement deviations.

II-4 Data Interface

Data Communication and Setup

Covers serial ports, data transfer, software updates, and external operation.

Software Update (Firmware) Installation

Guides on updating the ND 280 firmware via the USB interface.

External Operation and Commands

II-5 Measured Value Output

Starting Measured Value Output

II-6 Input and Output of Parameter List and Error Compensation Table

Text File Handling

II-7 Specifications

Device Specifications Overview