29
Pallet management
The TNC 640 can assign the appropriate
part program and datum shift to parts
mounted on pallets and brought to the
machine in any sequence. If a pallet is
exchanged, the TNC 640 automatically calls
the correct part program. This permits
automatic machining of a variety of parts in
any sequence.
Tool management
For machining centers with automatic tool
changers, the TNC 640 offers a central tool
memory for any number of milling and
turning tools. The tool memory is a freely
configurable file and can therefore be
optimally fitted to your needs. You can even
have the TNC 640 manage your tool names.
The control prepares the next tool change
while the current tool is still cutting. This
significantly reduces the non-cutting time
required for changing tools.
With the optionally available expanded tool
management you can also graphically
prepare and display any data.*
* The machine must be prepared by the machine tool
builder for this function.
To Next Page
Loading...
