42
Open for communication
– Fast data transfer with the TNC
The networked TNC 640
The TNC 640 can be integrated into
networks and connected with PCs,
programming stations and other data
storage devices. Even in its standard
version, the TNC 640 features a latest-
generation Gigabit Ethernet interface in
addition to its RS-232-C/V.24 data interface.
The TNC 640 communicates with NFS
servers and Windows networks in TCP/IP
protocol without needing additional
software. The fast data transfer at rates of
up to 1000 Mbit/s guarantees very short
transfer times.
Company network
Programming
system
TNC 320
Ethernet
interface
TNC 640
Ethernet
interface
iTNC 530
Ethernet
interface
Programs for data transfer
With the aid of the free PC software
TNCremo from HEIDENHAIN and an
Ethernet or other data interface you can
• transfer remotely stored part programs
and tool or pallet tables in both
directions,
• start the machine.
With the powerful TNCremoPlus PC
software you can also transfer the screen
contents of the control to your PC using
the live-screen function.
The transmitted programs are saved in the
internal memory of the TNC 640 and are
run from it at high speed.
For well-organized program management
on your control, simply place the individual
files in directories (folders). You can
structure the respective directories through
individual subdirectories.
To Next Page
Loading...
