HEIDENHAIN TS 460 User Manual

10/2014
TS 460
Mounting Instructions
Montageanleitung
Instructions de montage
Istruzioni di montaggio
Instrucciones de montaje
取付説明書
安装说明
安裝指導手冊
설치 지침

HEIDENHAIN TS 460 Specifications

General

Type	Touch Probe
Switching Direction	Bidirectional
Protection Class	IP67
Operating Temperature	0°C to 50°C
Measurement Accuracy	±1 µm
Accuracy	±1 µm
Measuring Range	5 mm
Measurement Range	5 mm
Transmission	Infrared

Summary

Mounting Instructions

Safety Warnings

Radio Transmission Approval

Items Supplied

Taper Shank

Component for holding tools or the probe.

Collision Protection

Device to prevent damage from collisions.

Replacement Stylus

Spare part for the touch probe tip.

Accessories

Dimensions

Operating Mode and Pairing

Setting the Operating Mode

Configure device operation via rotary switch.

Pairing Procedure

Establish wireless connection between devices.

Maintenance Procedures

Taper Exchange

Procedure for replacing the taper shank.

Stylus Exchange

Procedure for replacing the touch probe stylus.

Battery Exchange

Procedure for replacing batteries.

Centering Procedures

Electronic Centering

Automatic calibration using control system.

Mechanical Centering

Manual alignment when electronic centering is not possible.

Collision Protection Principle

Specifications and Status Indicators

Touch Probe Status Indicators

LED color and blinking patterns indicate device status.

Signal Sequence