HEIL DuraPack 5000 2017 - Page 101

Issued September 2017
Daily Checklist
Copyright 2017, Heil Environmental
Printed in U.S.A.
93
DuraPack
®
5000
CHECKS AND INSPECTIONS
INSPECTION
RESULTS CODE
Release the cable hook from it storage eye and hold the hook
PUSH the control lever – the cylinder should OUT (EXTEND)
PULL the control lever – the cylinder should move IN (RETRACT)
Attach the cable hook to its storage eye
Winch
Release the cable hook from it storage eye and hold the hook
PUSH the control lever – the winch spool should UNWIND the cable from the spool
PULL the control lever – the winch spool should WIND the cable on the spool
Attach the cable hook to its storage eye
Arm Mechanism
PULL the control lever – the lift arms should RAISE
PUSH the control lever – the lift arm should LOWER
Make sure the arm mechanism is at the full LOWER position
Roll Bar
PULL the control lever – the roll bar should RAISE
PUSH the control lever – the roll bar should LOWER
Make sure the roll bar is at the full LOWER position