Charger
Model Designation: BCC
Charging current: 1.6 A
Weight: 1000 g
Charging time: ~ 1
1
/2 hr at 20°C ambient temperature
Max. Ambient Temperature: approx. 0°C - 40°C
Max. Air Humidity: 10% - 90% (relative)
Mains Voltage: see nameplate on the charger
Battery
Type: NiCd 7.2V ≥ 2000 mAh
Storage
Temperature: 0° – 40° C
Air Humidity: 10% – 75% (relative)
Operating (charging/discharging)
Temperature: 10° – 40° C
Air Humidity: 10% – 75% (relative)
1.4 Equipment Items
1 Clipping Machine with Clipper Head, 1 Battery, 1 Charger, 1 Pair of Clipper Blades, 1 Special
Screwdriver, 1 Bottle of Special Lubricating Oil, 1 Cleaning Brush, 1 Set of Operating Instruc-
tions, 1 Transport and Storage Case.
2 Safety Regulations
2.1 Introduction
This section describes the mandatory safety regulations which must be observed when using
the clipping machine.
All persons undertaking work on or with the machine have an obligation to read the opera-
ting instructions.
The operating instructions must be kept safely in the storage case and accessible at all
times.
2.2 Symbols and Warning Signs
Various symbols are used in the operating instructions. They refer to potential dangers or point
to technical information, the non-observance of which will lead to personal injury, damage to
objects or inefficient operation.
To Next Page
Loading...
