Heinner HAC-HS12WIFI++ - Automation function introduction; Troubleshooting: Account Issues; Cannot register to become a member; Cannot log into the account

8
VII. Automation function introduction
There are three selections in Automation: Manually triggered, Time based, Appliance status. User
can add them in ConnectLife app as below:
1. Open the ConnectLife app.
2. Go to menu in the upper left corner > Automation > ADD SCENE.
Manually triggered: User can use this function to turn on/off the appliance manually. Once user
has set the actions, the user can manually trigger these actions.
Time based: It is a 7*24 Timer. User can set a start time and select days of a week, and then set
the device actions, when the set time requirement is reached, the actions will be executed.
Appliance status: Users can set different actions for the appliance such as: power, mode,
temperature (humidity), fan speed status. When the conditions set by the users are met, the home
appliance will work according to the rules set by the users.
Notice:
All Automation Function can support multi-device operation.
VIII. Troubleshooting
1. Cannot register to become a member
The reason:
• The account name or password is wrong.
• Incorrect e-mail format.
• Can’t receive a code from email to active account.
Solution:
• Please follow the prompt.
• Register by correct e-mail format.
• Please find email in your Mail garbage box or other box.
2. Cannot log into the account
Reason:
• Network anomaly.
• Account password is wrong.
• The account isn’t active.
Solution:
• Make sure connection is ok.
• Input correct password.
• Check whether the code in registered mailbox has been used.