During this mode:
If you press temperature set button, the mode will be cancelled and the setting will be
restored from 2.
Note: “Super cooling” mode will be automatically cancelled after 6 hours or when
cooling sensor temperature drops beneath 2°C.
Fridge Temperature Settings
• The initial temperature of the Setting Display is 5°C.
• Press fridge setting button once.
• Every time you press the button, the setting temperature will increase. (2°C, 4°C,
5°C, 6°C, 8°C, super cooling).
• If you press fridge setting button until super cooling symbol is displayed on your
fridge
-
Settings Display and you do not press any button within the following 3 seconds
-
Super cooling will blink
• If you keep on pressing, it will restart from last value.
Stand-by mode
How to activate ?
Set “2” set value and push set button until all leds are blink three times.
How it works?
In stand-by mode, all components will be disabled. If user push set button while in
stand-by mode, all leds will blink three times to show stand-by mode is active.
How to deactivate ?
Push and hold set button until display returns to normal working.After the mode is
deactivated, the “Alarm LED” may light on the display because the product may be hot.
The “Alarm LED” will turn off when the product reaches normal temperature.
To Next Page
Loading...
