EasyManua.ls Logo

Heinner HF-V401NFWDF+ - Maintenance and Troubleshooting; Cleaning and Maintenance

Heinner HF-V401NFWDF+
50 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.heinner.com
19
Disconnect the unit from the power supply before cleaning.
• Do not clean the appliance by pouring water.
• Make sure that no water enters the lamp housing and other electrical components.
The fridge should be cleaned periodically using a solution of bicarbonate of soda and
lukewarm water.
Clean the accessories separately with soap and water. Do not clean them in the
dishwasher.
Do not use abrasive products, detergents or soaps. After washing, rinse with clean
water and dry carefully. When you have finished cleaning, reconnect the plug to the
mains supply with dry hands.
Clean the condenser with a broom at least twice a year. This will help you to save on
energy costs and increase productivity.
THE POWER SUPPLY MUST BE DISCONNECTED.
Replacing LED lighting
If your fridge has LED lighting contact the help desk as this should be changed by
authorized personnel only.
If product equipped with LED lamp: This product contains a light source of energy
efficiency class <E>.
If product equipped with LED Strip(s) or LED card(s): This product contains a light source
of energy efficiency class <F>.
TRANSPORTATION AND CHANGING OF INSTALLATION POSITION
Transportation and changing of installation position
• The original packages and foamed polystyrene (PS) can be retained if required.
During transportation, the appliance should be secured with a wide string or a strong
rope. The instructions written on the corrugated box must be followed while transporting.
Before transporting or changing the installation position, all the moving objects
(ie,shelves,crisper…) should be taken out or fixed with bands in order to prevent them
from getting damaged.
Carry your fridge in the upright position.
Repositioning the door
It is not possible to change the opening direction of your fridge door, if the door handle
on your fridge is installed from the front surface of the door.
It is possible to change the opening direction of the door on models without any
handles.
If the door opening direction of your refrigerator may be changed, you should contact
the nearest Authorised Service Agent to have the opening direction changed.
IX. CLEANING AND MAINTENANCE

Related product manuals