Information on No-Frost Technology
No-frost refrigerators differ from other static refrigerators in their operating principle.
In normal refrigerators the humidity entering the refrigerators due to opening the door
and the humidity inherent in the food causes freezing in the backside of air duct. To defrost
the frost and ice in the backside of air duct, you are periodically required to turn off the
refrigerator, place the food that needs to be kept cooled in a separately cooled. The
situation is completely different in no-frost refrigerators. Dry and cold air is blown into the
refrigerator compartment homogeneously and evenly from several points via a blower fan.
Cold air dispersed homogeneously and evenly between the shelves cools all of your food
equally and uniformly, thus preventing humidity and freezing. Therefore your no-frost
refrigerators allows you ease of use, in addition to its huge capacity and stylish
appearance.
Control panel
Temperature set button
This button allows setting temperature of the fridge. In order to set values for fridge
partition, press this button. Use this button also to activate Super Cooling mode.
Lighting (If available)
When the product is plugged in for the first time, the interior lights may turn on 1 minute
late due to opening tests.
Alarm light
In case of a problem within the fridge, the alarm led will release red light.
Super Cooling Mode
When would it be used?
• To cooling huge quantities of food.
• To cooling fast food.
• To cooling food quickly.
• To store seasonal food for a long time.
How to use?
• Press temperature set button until super cooling light comes on.
• Super cooling led will light during this mode.
• For optimal appliance performance in maximum cooling capacity, set the appliance
to active Super Cooling mode 6 hours before you put the fresh food into the fridge.
To Next Page
Loading...
