Add your drinks with the help of water tank top cover.
Uphold the side locking covers to detach the water tank cover.
To serve your drink press valve lever slightly.
Filing the water tank
• Remove the top cover of the water tank.
• Fill up the tank with water.
• Mount back the top cover of the water tank.
Attention
• Do not use the water dispenser anything except water.
• If you leave water in the tank for a long time it could cause odour. In this case clean
the tank and keep using it.
• Clean up the water tank before using it for the first time.
Cleaning the Water Tank
• Lift the water tank.
• Remove the tank cover with upholding the side locking covers.
• Clean up the tank with warm water and reassemble the pieces you removed.
Stowing the Water Tank
• Install the water tank as shown.
• Be careful about the tap and the hole match each other while installing.
• Water flow can appear unwillingly if the tank have not taken its place properly. Also
check the gaskets are assembled properly.
To Next Page
Loading...
