Installation Area
WARNING
• Stability is important to prevent the product from wandering!
• Make sure the machine is standing leveled and stable .
• Make sure that the product does not stand onto the power cord.
•.Make sure to maintain the minimum distances from the walls as shown in the picture.
Before installing the machine, the location characterized as follows shall be selected:
1. Rigid, dry, and level surface.
2.Avoid direct sunlight.
3.Sufficient ventilation.
4.Room temperature is above 5 °C .
5.Keep far away from the heat sources such as coal or gas burning appliances
Levelling the Machine
The lock nuts on all four feet must be screwed tightly against the housing
1. Loosen the lock nut.
2. Turn the foot until it reaches the floor.
3. Adjust the legs and lock the nuts with a spanner. Make sure the machine is level using a
spirit level.
To Next Page
Loading...
