QUICK START GUIDE
• Before washing, please make sure the machine is installed properly.
• Your appliance was thoroughly checked before it left the factory. To remove any residual
water and to neutralize potential odors, it’s recommended to clean your appliance before
first use. For this reason, start the Cotton program at 90°C without laundry and detergent
Calibration
It’s recommended to calibrate the machine, so that provide the best performance. The
appliance is able to detect the amount of laundry loaded. This function is optimizing the
product performance by minimizing energy and water consumption, saving you money and
time. For this reason it’s recommended to calibrate the appliance for best use.
1- Remove all accessories from the drum and close the door;
2- Insert the mains plug to the socket;
3- Switch on the washing machine and press “Temp.” and “Delay” simultaneously for
10 seconds until “t19” is displayed;
4- Press [ ] to start the appliance and wait till “****” is displayed , and then “***”
(such as “126”)is displayed to indicate the real time drum speed. When the
number reaches a certain value (stop changing),it means the washing machine is
successfully calibrated.
Before Washing
To Next Page
Loading...
