CANCELLING PROGRAMME
If you want to cancel any programme running:
• Switch the programme knob to “CANCEL” position.
• Your machine will stop the washing operation and the programme will be cancelled.
• To get rid of the water accumulated in the machine switch the programme knob to any
programme.
• Your machine will perform the necessary discharge operation and cancel the
programme.
• You can run your machine by selecting a new programme.
FINISHING PROGRAMME
Your machine will stop by itself as soon as the programme you have selected finishes:
- End led will blink on the display panel
- You can open the machine’s door and remove the laundry.
- Leave the door of your machine open to allow the inner part of your machine to dry after
removing your laundries.
- Switch the programme knob to CANCEL position.
- Unplug your machine.
- Turn the water faucet off.
To Next Page
Loading...
