5. USING THE PRODUCT
1. Put the mains plug in an earthed wall socket.
2. Carefully pull the pan out of the air fryer. (Fig.3)
3. Put the ingredients in the basket. (Fig.5)
Note: Never fill the basket beyond the MAX indication or exceed the amount indicated in the as this could
affect the quality of the end result.
Tip: Use the separator to separate ingredients when you want to prepare different ingredients at the same
time. Place the separator in the basket and fill up each side of the basket with the ingredients.
Make sure you check the preparation time and the temperature required for the different ingredients before
you start to prepare them simultaneously. Potato cubes and schnitzel, for example, can be prepared
simultaneously because they require the same settings. Please note that the maximum amount for each of
the ingredients is half the normal amount.
4. Slide the pan back into the air fryer. (Fig.4)
Never use the pan without the basket in it.
Caution: Do not touch the pan during and sometime after use, as it gets very hot. Only hold the pan by the
handle.
5.Operate the control panel as follows
Button 1 - Power button
Once baskets and grills are properly placed in the main unit of housing
Plug in the power, the power indicator light gradually becomes bright and then gradually dim cycle
Selecting the power button will make the unit's default temperature 200℃ ，while the cooking time will be
set to 15 minutes.
Selecting the Power Button, a second time will start the cooking process.
Pressing the power button for 3 seconds to close the entire device during cooking，
To Next Page
Loading...
