What to do if my HELI Truck can't move?
If your HELI Truck isn't moving, there are several potential causes. First, ensure the battery connector is properly connected. Next, check that the electric lock switch is in the “0” position and the emergency stop switch is open. Also, verify the battery has sufficient charge and is not currently being charged. Finally, inspect the fuse for any damage; replace if needed.
Why can't goods be lifted up with my HELI Truck?
If goods can't be lifted on your HELI Truck, several factors could be the cause. It might be related to the truck not operating correctly, so refer to the troubleshooting steps for when 'Vehicles cannot move'. Check the hydraulic oil level and add oil if it's low. Inspect the fuse for damage and replace if necessary. Ensure you are not overloading the truck, respecting the rated capacity. Lastly, examine the Up switch for bad contact or damage, and replace it if needed.
What to do if goods can’t be lowered down on my HELI Trucks?
If goods are stuck and cannot be lowered down on your HELI Truck, it could be due to dirty oil blocking the control valve. Check the hydraulic oil, clean the control valve, and replace the oil if necessary. Another possibility is that the solenoid valve for lowering is either not opening or is damaged, in which case you should check or replace the valve.
Why can’t my HELI Truck stop when lifting?
If your HELI Truck doesn’t stop when lifting, the lifting micro switch may be damaged. Cut off the power and replace the lifting micro switch.
How to fix a HELI Truck moving in one direction?
If your HELI Truck is only moving in one direction, the sensitive switch and its connecting cable might not be making good contact. Inspect the sensitive switch in the control lever and the connecting cable to ensure they are properly connected.
Explains the brake system and provides a schematic.
Step-by-step guide on how to operate the pallet truck.
Guidelines and procedures for repairing and maintaining the truck.
Covers battery maintenance, charging, usage notes, disposal, specifications, and installation.
Fundamental safety rules for truck operation and operator conduct.
Essential pre-operation checks to ensure safety and functionality.
Comprehensive regulations for safe operation, environment, and specific scenarios.
Common faults, their causes, and recommended treatments for the truck.
To Next Page
General
