What to do if my HELI Truck can't move?
If your HELI Truck isn't moving, there are several potential causes. First, ensure the battery connector is properly connected. Next, check that the electric lock switch is in the “0” position and the emergency stop switch is open. Also, verify the battery has sufficient charge and is not currently being charged. Finally, inspect the fuse for any damage; replace if needed.
Why can't goods be lifted up with my HELI Truck?
If goods can't be lifted on your HELI Truck, several factors could be the cause. It might be related to the truck not operating correctly, so refer to the troubleshooting steps for when 'Vehicles cannot move'. Check the hydraulic oil level and add oil if it's low. Inspect the fuse for damage and replace if necessary. Ensure you are not overloading the truck, respecting the rated capacity. Lastly, examine the Up switch for bad contact or damage, and replace it if needed.
What to do if goods can’t be lowered down on my HELI Trucks?
If goods are stuck and cannot be lowered down on your HELI Truck, it could be due to dirty oil blocking the control valve. Check the hydraulic oil, clean the control valve, and replace the oil if necessary. Another possibility is that the solenoid valve for lowering is either not opening or is damaged, in which case you should check or replace the valve.
Why can’t my HELI Truck stop when lifting?
If your HELI Truck doesn’t stop when lifting, the lifting micro switch may be damaged. Cut off the power and replace the lifting micro switch.
How to fix a HELI Truck moving in one direction?
If your HELI Truck is only moving in one direction, the sensitive switch and its connecting cable might not be making good contact. Inspect the sensitive switch in the control lever and the connecting cable to ensure they are properly connected.
Details procedures and approvals required for any modifications to the truck.
Details braking system components, operation, and includes a schematic diagram.
Guides users through powering on, lifting/lowering forks, driving, braking, and parking.
Explains the function and purpose of the emergency reverse button for safety.
Details procedures for carrying and placing goods with the pallet truck.
Covers battery disposal, specifications, storage, transportation, installation, and power indicators.
Details essential pre-use checks, including for new cars, lubrication, and battery status.
Covers operator requirements, prohibitions, handling malfunctions, environmental protection, and hazardous areas.
Lists common truck faults, their causes, and recommended treatment procedures.
To Next Page
General
