41
The manufacturer shall provide quality assurance for the motor controller, and timely
inform the manufacturer to provide after-sales service in case of failure; if not
authorized and approved by the manufacturer, please do not open the motor
controller for maintenance, and the user shall bear the responsibility for personal and
property losses caused by the user's unauthorized maintenance.
4.7 Hand brake switch
When the truck is stopped and driver is away from the seat, apply parking brake
manually. At this time, only hand brake light on the meter turns on all the time
and truck can not travel.
When restarting the truck, release the parking brake manually, at this time, the brake
light on the meter turns off. The track can travel again.
Figure 4-8 hand brake switch
Danger:
Do not apply parking brake when travelling.
Under certain cases, if parking brake is applied suddenly, goods may falling
down.
To Next Page
Loading...
