HELIX DSP.3S - Configuration notes for the DSP sound effects; Notes for Augmented Bass Processing with its functions Dynamic Bass Enhancement and SubXpander

28 pages

To Next Page

To Previous Page

Notes for Augmented Bass Processing with

its functions Dynamic Bass Enhancement and

SubXpander

There are as well some adjustments necessary if

the Augmented Bass Processing and its sound ef-

fects shall be used.

1. You need either a mono or stereo input signal

(analog or digital).

2. Open the IO menu in the DSP PC-Tool. Route

all left and right analog or digital input signals to

output channel H.

3. Repeat the routing for all routing matrices used.

4. Now switch to the FX menu and activate the de-

sired sound e󰀨ect by placing a tick.

Note: The Augmented Bass Processing a󰀨ects only

the output channel H.

Related product manuals