HELIX DSP-3 User Manual

DSP.3
deutsch / english
Digitaler High-Res 8-Kanal Signalprozessor mit
96 kHz / 32 Bit Signalweg
Digital High-Res 8-channel signal processor with
96 kHz / 32 Bit signal path

HELIX DSP-3 Specifications

General

Brand	HELIX
Model	DSP-3
Category	Signal Processors
Language	English

Summary

General Instructions

Installation Guidelines for HELIX Components

Instructions to prevent damage and injury during HELIX component installation.

Connecting the HELIX DSP.3 Signal Processor

Guidelines for safely connecting the DSP.3 to the vehicle's electrical system.

Initial Start-up and Functions

Input Connections and Sensitivity Adjustment

Configuring Line, Highlevel, and Optical inputs with sensitivity settings.

Power Input and Grounding

PC Connectivity and Output Connections

Installation and Connections

Connecting to Head Unit / Car Radio

Steps for connecting pre-amplifier and highlevel speaker inputs to the car radio.

Digital Source and Input Sensitivity Setup

Power Supply, Remote, and Auto-Remote

Connecting power supply, remote input, and configuring auto-remote features.

DSP Configuration and Remote Output

General DSP settings via PC-Tool and connecting the remote output to amplifiers.

Connection to a PC

DSP PC-Tool Software Installation

Downloading and installing the necessary configuration software for the DSP.3.

Connecting and Configuring the DSP.3

Steps for connecting the DSP.3 to a PC and performing initial setup and configuration.

DSP Sound Effects Configuration

Center Processing Setup (RealCenter/ClarityXpander)

Front Processing Setup (StageXpander/ClarityXpander)

Augmented Bass Processing Setup

Unique Features of the HELIX DSP.3

96 kHz Sampling Rate Capability

ACO - Advanced 32 Bit CoProcessor

Smart Highlevel Input ADEP.3 Circuit

Start-Stop Capability and Power Save Mode