Need help?Do you have a question about the HELIX DSP MINI MK2 and is the answer not in the manual?
General| Input Channels | 6 |
|---|---|
| Sampling Rate | 96 kHz |
| Digital Signal Processing | Yes |
| Crosstalk | > 90 dB |
| Processing Power | 32-bit |
| Connectivity | USB |
| Software Compatibility | Windows |
| Outputs | 8 x RCA / Cinch 1 x Remote Out |
| Signal-to-noise ratio digital input | 110 dB |
| THD+N digital input | < 0.01% |
| THD+N analog input | < 0.01% |
| IMD digital input | < 0.01% |
| IMD analog input | < 0.01% |
| Signal-to-Noise Ratio | >105 dB |
Provides essential safety and installation guidance for HELIX components to prevent damage and injury.
Details crucial connection requirements for the DSP MINI, including voltage and cable usage to prevent damage.
RCA inputs for connecting pre-amplifier signals.
Speaker inputs for connecting factory or aftermarket radios without lowlevel outputs.
Optical input for digital stereo signals (SPDIF format).
Switch to activate/deactivate the automatic turn-on feature of the signal processor.
Connector for DC power supply with additional remote in/out for external amplifiers.
Switch to define connection between power ground and signal ground for noise reduction.
Button to switch setups or initiate a device reset.
LED indicating the operating mode of the DSP and its memory.
Connects the DSP MINI MK2 to a PC for configuration.
Multifunction interface for accessories like an optional remote control.
Pre-amplifier outputs for connecting power amplifiers.
4-channel lowlevel line input for connecting signal sources like head units/radios.
4-channel highlevel speaker inputs for direct connection to radio/amplifier outputs.
Optical input for digital audio sources in SPDIF format.
Automatic turn-on feature for highlevel inputs or remote input.
Connects to vehicle power supply and provides remote in/out for amplifiers.
Allows decoupling of signal and power ground to avoid noise issues.
Allows switching between 10 internal memory locations or performing a device reset.
Indicates operating mode (ready, power save, protection, software status).
Connects to PC for software configuration and updates.
Interface for optional accessories like remote controls for feature adjustments.
6-channel pre-amplifier outputs for connecting power amplifiers.
Details on connecting the DSP to the car's head unit or radio via pre-amplifier or highlevel inputs.
Using RCA cables to connect pre-amplifier outputs from the head unit.
Connecting directly to speaker outputs of radios/amplifiers using speaker cables.
Connecting sources with an optical digital output.
Adapting input sensitivity to the signal source to avoid damage and ensure optimal performance.
Instructions for safely connecting the DSP to the vehicle's power supply.
Connecting the remote input for signal processor turn-on when using analog/digital inputs.
Details on the Auto Remote function and mandatory remote input use.
Recommends general DSP settings via PC-Tool software before first use.
Using the remote output to turn on external amplifiers to avoid noise.
Steps to download and install the necessary PC software for configuration.
Instructions for connecting the DSP to a PC via USB cable.
Starting the software and allowing automatic updates for optimal performance.
Using the DSP PC-Tool software for comprehensive configuration of the device.
Guides for setting up RealCenter and ClarityXpander for center speaker output.
Notes on how StageXpander and ClarityXpander affect output channels and linking options.
Guidance for setting up Augmented Bass Processing, Dynamic Bass Enhancement, and SubXpander.
Function to determine delay time for switching the DSP on and off to prevent noise.
Configuration for 10 memory locations and switching via remote controls.
Controls temporary deactivation of remote output during setup switches.
Adapting ADEP.3 circuit for OEM radios with specific output stages.
Steps to install an extension card like Bluetooth or USB audio.
Steps to prepare the HEC module and the device for installation.
Inserting the HEC module into its designated slot.
Supports 96 kHz sampling rate for extended audio bandwidth up to 40 kHz.
Powerful 32-bit CoProcessor for faster setup switching and data communication.
ADEP.3 circuit avoids issues with car radio speaker diagnostic functions.
Assures stable internal voltage during engine crank, even at 6 Volts.
Reduces amplifier power consumption by turning them off when no signal is present.
Allows signal-controlled switching between analog and digital inputs.
Details the types, quantities, and sensitivity of all inputs and outputs.
Specifications for frequency response, DSP power, signal quality, and distortion.
Covers operating voltage, power, current draw, and physical dimensions.
Lists additional hardware features like HEC slot and ADEP.3 circuit.
To Next Page
