GETTING STARTED
Charging
1. Plug one end of the Micro USB charging
cable into the charging port and the other
end to a standard USB charging port.
2. The red light will turn on when charging
and will turn off once fully charged. The
charging time is approximately 2 hours.
1
User Guide for Helix FLYWIRELESS In-Flight Entertainment Adapter
English
ETHADPBTTR
Transmitter Instructions
1. Turn on the Bluetooth device (speaker/headphones) and place into pairing mode.
2. Press and hold for 3 seconds to power FlyWireless on.
3. Switch on side of unit to “TX” position. “TX” indicator will turn on.
4. Double click to enter pairing mode. (“TX” indicator will begin flashing).
5. After the connection is successful, the “A” indicator will turn on.
6. Insert the 3.5mm audio cable into the 3.5mm audio port of the FlyWireless. Insert the
other end of the audio cable into the audio output device (TV/Computer). You can
now start transmitting audio.
To Next Page
Loading...
General