OVERHEAT PROTECTION:
This heater is fitted with a safety overheat protection device. If overheating occurs, ensure the appliance is
switched ‘Off’ and turn off the power supply. Unplug the appliance and let it cool for 30 minutes. If
something is obstructing the grille, ensure the object is removed. After 30 minutes has passed, turn the
heater on again as described above.
TIP OVER SWITCH:
This Heater will only work on a firm stable surface. If the Heater is not 100% stable and in an upright
position (vertical), the unit will switch off until placed in the correct position.
Remote Control Instructions
The remote control uses one button cells (CR2025 - 3V). We recommend the use of a lithium type battery
for longer use.
Note: Please follow battery disposal instruction on battery packaging, or contact your local council for safe
disposal of batteries
WARNING: Do not touch the machine while it is on and ensure the air outlet/inlet is never covered.
Cleaning & Maintenance
1. Wait for the machine to completely cool down before commencing any cleaning.
2. Always disconnect the appliance from the main power outlet before cleaning.
3. Clean the outside surface of the heater with a damp lint free cloth. Never immerse directly in water!
4. Do not use any detergents/solvents or harsh chemical agents/abrasives to clean the heater
5. Ensure the unit is completely dry and nothing is blocking the air inlet/outlet before powering on.
Specifications
To Next Page
Loading...
