The HELLER Aluminium WiFi Panel Heater (Model: HPH20) is a 2000W electric heater designed for household use, offering both free-standing and wall-mounted installation options. This appliance is equipped with WiFi connectivity, allowing for remote operation via a mobile application.
Function Description:
The primary function of this device is to provide heating for rooms. It operates by converting electrical energy into heat, which is then distributed into the surrounding environment. The heater features a control panel with an LED display, temperature adjustment, mode selection, and a timer function. Users can set a desired temperature range from 5°C to 40°C. The heater automatically switches on when the temperature decreases and switches off when the temperature increases, maintaining the set temperature. It offers both low and high power heating modes. The WiFi connectivity enables users to control the heater remotely through the "GAFSmartLife" mobile application, allowing for power on/off, temperature adjustment, and timer settings from a smartphone. The device emits a beep sound upon each operation setting. A reset function is available by long-pressing the reset button for 5 seconds.
Important Technical Specifications:
- Model: HPH20
- Voltage: 220-240Vac
- Frequency: 50-60Hz
- Power: 1000/2000W (indicating two heating levels)
- Temperature Range: 5°C to 40°C
- Timer Interval: 1 to 24 hours
- Connectivity: 2.4 GHz Wi-Fi Network (not compatible with 5GHz Wi-Fi)
- Installation: Free-standing (with supplied feet) or Wall-mounted (with supplied bracket and screws)
- Clearance Requirements (Wall Mounting): At least 15 cm above the floor, at least 60 cm clearance between the top of the heater and the ceiling.
- Safety Features: Automatic shut-off when desired temperature is reached, warnings against covering the heater, touching hot surfaces, blocking air intakes/exhaust vents, and using in wet areas.
Usage Features:
- Control Panel: Located on the device, it includes an LED display, buttons for temperature adjustment, mode selection (low/high heating level), timer, and power/standby.
- Remote Control (via App): The "GAFSmartLife" application, available on Google Play and Apple Stores, allows users to connect the heater to their mobile device via WiFi. This enables remote control of the heater's functions, including power, temperature, and timer settings, from anywhere with an internet connection (WiFi or 4G).
- Temperature Control: Users can set the desired room temperature by adjusting the temperature control on the panel or via the app. The heater will cycle on and off to maintain this temperature.
- Heating Modes: The heater offers two power levels (1000W and 2000W) for different heating intensities.
- Timer Function: A programmable timer allows users to set the appliance to start or stop at a desired time, with intervals from 1 to 24 hours. Setting the timer to "00" turns it off.
- Installation Flexibility: Can be used as a portable free-standing unit with the included feet or permanently mounted on a wall using the provided bracket and screws.
- Wi-Fi Indicator Light: A light on the control panel indicates the Wi-Fi connection status, blinking rapidly when ready for pairing.
Maintenance Features:
- Cleaning: Before cleaning, the heater must be completely cooled down and unplugged. It should be wiped with a soft, wet cloth. Abrasives and solvents should not be used.
- Dust Removal: Regular removal of dust from the surface is necessary to maintain performance and safety.
- Storage: If the heater is not used for long periods, it should be wiped clean and stored in its box in a dry, ventilated room, away from high humidity.
- Water Contact: The heater should never be washed or immersed in water. If water is on the surface, it must be disconnected from power and completely dried before next use.
- Cord Care: The power cord should not be wrapped around the appliance after use, run under carpeting, or covered with throw rugs. It should be positioned away from traffic areas to prevent tripping. Any damage to the supply cord requires replacement by the manufacturer, its service agent, or similarly qualified persons.
Safety Precautions (Summarized):
- Do not cover the heater to avoid overheating.
- Do not touch hot surfaces during use to prevent burns.
- Keep combustible materials (furniture, bedding, curtains, etc.) at least 1 meter (3.3 ft) away from the heater.
- Do not use the heater in wet areas, near water, or in the immediate surroundings of a bath or swimming pool.
- Ensure the heater is switched off before plugging in.
- Do not use outdoors.
- Protect the product from sudden impacts or high humidity.
- Do not touch with wet hands when plugged in.
- Do not use if dropped or if there are visible signs of damage.
- Ensure the appliance is connected to the correct voltage as printed on the rating label.
- Do not locate immediately below a socket-outlet.
- Do not use in small rooms with persons not capable of leaving the room on their own, unless constantly supervised.
- The heater must be installed so that switches and controls are not reachable by a person in a bath or shower.
- Children should be supervised to ensure they do not play with the appliance.
- The appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless supervised or instructed.
Need help?
To Next Page
General
