Operating Instructions
Before inserting the plug into a power outlet, make sure that the correct voltage being used corresponds to
what is indicated on the rating label, and that the socket has an earth facility.
Plug the unit into the main power supply, and then switch ON the main power supply
Control panel for Manual operation. Remote Control for remote operation
Fan mode:
Remote:
1. Press button, the fan heater will switch ON and the fan will blow.
2. To switch the fan OFF, press button. The fan heater will continue to operate for 10 -15 sec, and
then it will switch OFF.
Manual:
1. Press button, the fan heater will switch ON and the fan will blow. FAN indicator is light.
2. To switch the fan OFF, keep pressing button until the FAN indicator flashes. The fan heater
will continue to operate for 10 -15 sec, and then it will switch OFF.
Heating mode:
Manual:
1. Press button, the heater will switch ON and the fan will blow.
2. Press button, to operate at 1000W mode. The 1000W indicator will light up.
3. Press button again, to operate at 2000W mode. The 2000W indicator will light up.
4. Press button again, to operate the Oscillation mode. The 2000W and the “SWING” indicators
will light up together.
To Next Page
Loading...
Need help?
General