HELLER CWH521NS User Manual

Features
Operating Instructions
1. Once you have successfully installed the Heater, insert the plug into a suitable power outlet and turn
the power supply on.
2. Turn the heater ‘On’ by pressing the button on the control panel. The unit will display the current
room temperature and will automatically operate in ‘Fan’ mode.
3. Once the heater is on, press the button again to set the heat to ‘Low’ heat mode.
4. To set the heater to ‘High’ heat mode, press the for the third time.
5. To turn the heater ‘Off’ press the button for the fourth and final time.
NOTE: Pressing the button once turned ‘Off’ will begin the above cycle again.
WARNING: Allow the heater to cool down for 30-60 seconds before switching on again and before turning off
at the power outlet. This will protect the inner parts.
Top cover
Air outlet
Timer button
Power On/Off
button
Power ‘On’
indicator light
Control
panel
Decrease temperature button
Increase temperature button
Timer button
Mode button
On/Off button

HELLER CWH521NS Specifications

General

Brand	HELLER
Model	CWH521NS
Category	Heater
Language	English