Power & Heat Settings & Thermostat Control
OPERATION OF THIS PRODUCT
- Place the heater on a flat, smooth and firm surface.
Power & Heat Settings
(1500W) HIGH heat setting
Thermostat Control
The thermostat maintains the desired room temperature by automatically switching On/Off the fan heater.
As you rotate the knob clockwise, the room temperature increases.
Operate the unit until the room reaches a comfortable temperature. Switch off the unit by turn the
thermostat knob anti-clockwise until you hear a “click” and the unit will shut down.
- Turn off the unit when not in use (do not leave unattended).
- Remove the mains plug from the wall socket and allow the unit to cool down for 5-10 minutes.
- Store the heater in the original box and store it in a cool, dry place.
Tip Over Switch
Your heater is designed to automatically shut the heater off when the unit is tipped over. The unit will
automatically turn on once it is returned to its normal upright position. Make sure the unit is placed on a
flat, even, smooth and firm surface.
Do not use on thick and long pile carpets, as the heater may not work, due the tip over switch not been
activated.
Thermostat
Adjustment Control
Knob
Power & Heat
Settings Control Knob
Power ‘On’ Indicator
LED Light
To Next Page
