Conditions for ice
making cycle are
right but no ice
cubes are made.
A. There is no refrigerant in
the compressor.
B. Compressor is broken
down.
C. Fan motor is broken.
Machine keeps
running, but the
water is warmer
than the normal
water temperature.
The magnetic valve is broken.
Replace the magnetic valve.
Water leakage at
front bottom of the
unit.
The silicon stopper is not well
inserted.
Please insert the silicon stopper well.
PLEASE NOTE
Fill with drinkable water only.
It is normal for the compressor and condenser surface to reach temperatures between 70- 90°C during
operation, so surrounding areas may be very hot.
Due to fast freezing, ice cubes may appear “Cloudy”. This is air trapped in the water and will not affect the
quality or taste of the ice.
Do not immerse the appliance in water.
SPECIFICATIONS
Daily Ice Output：10kg / 24 hours
Ice Storage Capacity：600g
Water Reservoir Capacity：1.7L
Unit’s Dimensions: W243 x D390 x H340mm
CORRECT DISPOSAL OF THIS PRODUCT
When your appliance reaches the end of its working life, care must be taken when disposing of this Ice Maker
in order to avoid a hazard. When disposing of the Ice Maker, cut off the plug so that it will render the unit
unusable to avoid electrical shock. Also contact your local council for instructions on how to safely dispose of
the compressor and refrigerant.
To Next Page
Loading...
Need help?
General
