Hello Kitty HK250 - Setting the LCD Contrast

11
SETTING THE LCD CONTRAST
If you find the LCD screen difficult to read, set the contrast level as follows:
Press and hold the ERASE button ❶
for more than two seconds or press
the TALK button ❷ twice to clear any
displayed number and return to the
Standby mode.
2
1
1
While in the Standby mode, press the
PROG button.
2
Press the REVIEW/VOLUME 
button ❶ three times or the REVIEW/
VOLUME❷ button ❷ once to enter the
Contrast menu.
1
2
3
Press the ➛ or ❿button to select one
of the three contrast levels (3 being
the darkest, 1 being the lightest).
4
Press the PROG button again to store
the contrast level; “Save ok” will
appear in the display for three seconds
and a confirmation tone will be heard.
5
SET-UP INSTRUCTIONS (CONTINUED)
HK250.O/M.QXD 9/26/02 3:49 PM Page 11