E-7
8, VOLUME + BUTTON 16, CD DOOR OPEN/CLOSE BUTTON
POWER SOURCES
The KT2029BT operates using standard 120V~ 60Hz AC household power or 6 x “C” size (UM-2)
batteries (Not included).
BATTERY OPERATION
For best performance and longer operating time, we recommend the use of alkaline batteries.
1. Remove the Battery Door.
2. Following the polarity (+ and -) diagram as shown inside the battery compartment, insert 6 ‘C’ size
(UM-2) batteries.
3. Replace the Battery Door.
BATTERY WARNING
1. Be sure that the batteries are installed correctly. Wrong polarity may damage the unit.
2. (a) Do not mix old and new batteries.
(b) Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
3. If the unit is not to be used for an extended period of time, remove the batteries. Old or leaking
batteries can cause damage to the unit and may void the warranty.
4. Do not dispose of batteries in fire. Batteries may explode or leak.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and
rupture.( Follow battery manufacturer’s directions ).
AC POWER CONNECTION
1. Insert one end of power cord to the AC Socket (#15) at the back of the KT2029BT.
2. Connect the power cord to AC power source.
3. When the unit is operated from AC power source, the internal battery source will automatically be
disconnected.
CD OPERATION
NOTE: This player plays not only commercial CDs but also self-compiled CD-R/RW discs.
Press the POWER/MODE BUTTON (#3) once to turn on KT2029BT. The LCD DISPLAY (#11) will
light. The player will start reading the disc and will display "no" if no disc is loaded.
Press CD DOOR OPEN/CLOSE BUTTON (#16) to open the CD Door. Carefully place an audio CD
with its label side upward in the CD compartment and close the CD Door.
The total number of tracks on the CD will appear in the LCD DISPLAY (#11) after a few seconds.
Press the PLAY/PAUSE BUTTON (#6). The CD will start playing from the first track.
Adjust the VOLUME + / VOLUME - (#8 / #9) to obtain the desired sound level from the Built-in
Speakers. To suspend playing, press the PLAY/PAUSE BUTTON (#6) again. To resume playing,
press the PLAY/PAUSE BUTTON (#6) again.
You can choose to play your favorite track directly by pressing either the SKIP + / TUNER + BUTTON
(#1) or SKIP - / TUNER – BUTTON (#2). The LCD DISPLAY (#11) will indicate the track number
selected.
To Next Page
Loading...