E-8
To locate a particular passage within a track, keep the SKIP + / TUNER + BUTTON (#1) or SKIP - /
TUNER – BUTTON (#2) depressed until it is found.
NOTE: Low level audio will be heard during the search process to assist in locating the correct point
in the track.
Repeat Play
To repeat a particular track, press the PLAY MODE / FM ST BUTTON (#7) once or until the REPEAT
INDICATOR
shows on the LCD Display (#11) in CD Play Mode.
To repeat the entire CD, press the PLAY MODE / FM ST BUTTON (#7) twice or until the REPEAT
ALL INDICATOR
shows on the LCD DISPLAY (#11) in CD Play Mode.
To play the CD randomly, press the PLAY MODE / FM ST BUTTON (#7) three times or until the
random indicator RDN shows on the LCD DISPLAY (#11) in CD Play Mode.
Programmed Play
This function allows the tracks to be played in a programmed sequence.
1. In CD stop mode, press the MEMORY BUTTON (#4) once. The MEM indicator and
Program
Channel Number "P01" will appear and blink in the LCD DISPLAY (#11) to prompt for input.
2. Press the SKIP + / TUNER + BUTTON (#1) or SKIP - / TUNER – BUTTON (#2) to select the
song to be programmed.
3. Press the MEMORY BUTTON (#4) again to store selection. The Program Channel Number will
change to “P02” and blink to prompt for input 90 seconds.
4. Press the SKIP + / TUNER + BUTTON (#1) or SKIP - / TUNER – BUTTON (#2) again to select the
next song to be programmed and press the MEMORY BUTTON (#4) to store selection.
5. Repeat steps 2 - 4 to program as many as 20 tracks.
6. You may repeat the current programmed track or all programmed tracks by pressing the PLAY
MODE / FM ST BUTTON (#7) once (one track) or twice (all tracks).
7. Press PLAY/PAUSE BUTTON (#6) to start to play the tracks in a programmed sequence.
8. Press STOP/PRESET BUTTON (#10) once to stop playback.
9. To cancel programmed play, press the STOP/PRESET BUTTON (#10) again in STOP mode.
When you wish to turn off the CD PLAYER, press and hold the POWER/MODE BUTTON (#3). The
KT2029BT will turn off.
NOTES ON CD-R/RW DISCS
Because of non-standardized format definition/production of CD-R/RW discs, playback quality &
performance are not guaranteed.
Manufacturer is not responsible for the ability of CD-R/RW discs to play due to recording
conditions such as PC performance, writing software, media ability, etc.
Do not attach a label or seal to either side of the CD-R/RW disc. It may cause a malfunction.
To Next Page
Loading...