NETLink
®
PRO family Application Examples
• A text editor opens.
• Search for this in color highlighted line:
• The highlighted line is to be replaced with the following:
ag0 = "/type=s7_osi /ip_adr=XXX /rtsap=[02.0Y] /wtsap=[02.0Y] /ltsap=[02.0Y] /uni=yes"
• In place of the “XXX” enter the IP address of the NETLink
• Replace every “Y” with the MPI address of the PLC con-
nected to the NETLink
• The resulting string should look something like this:
• Close the text editor and driver selection screen by press-
ing “OK”
• From the menu bar press „Tag“ -
> „New“ -> „Num“.
To Next Page
Loading...
