Helmholz NETLink PRO Series User Manual

Helmholz GmbH & Co. KG | Hannberger Weg 2 | 91091 Großenseebach | Germany
Phone: +49 9135 7380-0 | Fax: +49 9135 7380-110 | E-Mail: info@helmholz.de | Internet: www.helmholz.de
NETLink
®
PRO family
Application Examples with RFC 1006
Edition 7 / 05.11.2017
Helmholz products
S7/S5 OPC-Server V4.10.2.9117 (Company Helmholz)
Products of other manufacturers
INAT-OPC-Server (INAT GmbH)
Indusoft Web Studio V7.0 (Indusoft)
InTouch V9.5 (Wonderware GmbH)
KEPserverEx V5.4.135.0 (KEPware Inc.)
PROCON-Win V5.3 (GTI Control)
VisAM Win32 (VISAM GmbH)
WinCC V7.4 (Siemens AG)
WinCC flexible 2005/2007 (Siemens AG)
ZenOn V6.2 (COPA-DATA)

Helmholz NETLink PRO Series Specifications

General

Product Series	NETLink PRO Series
Category	Gateway
Power Supply	24 VDC
Protocols	Modbus TCP, Modbus RTU, Profibus
Configuration	Web-based
Interface	Ethernet
Certifications	CE

Summary

Systeme Helmholz OPC-Server V4.12.0.11527

Configuration of the communication partner

Start S7-OPC Server config; select "Devices" and "S7-TCP/IP".

INAT-OPC-Server (INAT GmbH)

Configuring the INAT OPC server

Open "Configuration->AccessPathDefinition"; create new connection.

Indusoft Web Studio V7.0

Configuring the Indusoft communication driver

Choose "Comm" tab; right-click "Drivers"; choose "Add/Remove drivers".

KEPserverEx V6.2.429.0 (KEPware Inc.)

Configuring KEPserverEx

Start KEPServerEx; create project or right-click demo project; select "New Channel".

PROCON-Win V3.2 (GTI Control)

Configuring the driver and connection

Open PROCON-WIN 5 VisuDesigner; create new project.

VisAM Win32 (VISAM GmbH)

Configuring VisAM Win 32

Open VisAM editor; select channels; click assignment 1.

WinCC V7.4 (Siemens AG)

Add the protocol driver

Create RFC1006 link; create new TCP/IP link in 'SIMATIC S7 PROTOCOL SUITE'.

Creating a variable

WinCC flexible 2005/2007 (Siemens AG)

Configuring connections

Start WINCC flexible Project; open connections in communications register.

Configuring the PG/PC interface

ZenOn V6.2 (COPA-DATA)

Configuring Zenon

Setting the driver